Trituradora de madera de 5" y 15 HP, 420cc, a gasolina con arranque eléctrico
Trituradora de madera de 5" y 15 HP, 420cc, a gasolina con arranque eléctrico
Pre-venta
No se pudo cargar la disponibilidad de retiro
¿Preguntas antes de comprar?
-
Llámanos al 888-589-8148
Lun - Vie 8AM - 5PM EST -
Service@cheryindustrial.com
Correo electrónico de contacto de Servicio al Cliente

Trituradora de madera de 5" y 15 HP, 420cc, a gasolina con arranque eléctrico
Descripción
La astilladora de madera de 5" y 15 HP con arranque eléctrico y motor de gasolina de 420 cc está diseñada para astillar trabajos pesados en entornos exigentes como granjas, silvicultura y grandes proyectos de paisajismo. Impulsada por un robusto motor RATO R420D, esta máquina ofrece un rendimiento potente y constante con un cómodo funcionamiento de arranque eléctrico. El sistema de corte de tambor procesa eficientemente ramas de hasta 5 pulgadas de diámetro, convirtiendo los voluminosos residuos de madera en astillas manejables. Diseñada para la movilidad y la productividad, esta astilladora de madera remolcable maneja grandes volúmenes de material con facilidad, haciendo que la limpieza sea más rápida, segura y eficiente.
Motor de alta potencia de 15 HP
Motor RATO de 420 cc OHV con arranque eléctrico para una potencia fiable.
Capacidad de astillado de 5"
El sistema de corte de tambor maneja ramas grandes de manera eficiente.
Rendimiento de trabajo pesado
Ideal para granjas, silvicultura y trabajos de paisajismo a gran escala.
Diseño remolcable
Fácil transporte y posicionamiento para flexibilidad en el lugar.
Características
-
RATO R420D Engine
This towable wood chipper is equipped with a 420cc 15HP RATO R420D e-start engine, which meets EPA certification standards.
-
Chipping Diameter and Cutting Method
Feed Chute W x L: 17" x 21". Feed chute opening method: fixed with screws. The core cutting component employs a roller drum cutting method. It delivers maximum cutting force to easily handle wood or branches up to 5 inches in diameter.
-
Discharge Chute
360 Degree Rotating Discharge Chute design.
-
Supporting Leg
Provides additional support points when equipment is in operation or parked, preventing tipping or shaking caused by uneven weight distribution, imbalanced loads, or unstable ground.
-
Adjustable Deflector
Adjustable deflector design.
-
16x8-7 Tubeless Tire
This towable wood chipper is equipped with 2 tubeless rubber tires sized 16x8-7, which allows you to easily move. Provides enhanced stability during towing.
-
Tow Bar with 2 in Coupler
Compliant with American standards, equipped with a safety lock buckle.
-
Emergency Stop Button
Set very close to the operator. In case of emergencies or equipment malfunctions, rapid shutdown can be activated to ensure safety.
Especificaciones
Envío
Envío desde almacén de EE. UU., tiempo de cumplimiento: 6-10 días hábiles
• Largo x Ancho x Alto (pulgadas): 35x30x42
• Peso (lb): 371
• Se requiere un montacargas o equipo equivalente para la descarga.
Para obtener información de envío adicional, visite nuestra Política de envío.
Montaje
Preguntas frecuentes
Why won't the engine start?
The engine could not start because of these problems, please check them and fix your issue accordingly.
- Is the ignition switch in the “ON” position?
- Is the fuel shut-off valve on?
- Are you using fresh and clean gas? If the gas is old, change it. Use a fuel stabilizer if you keep gas longer than 30 days.
- Is the spark plug clean? If the spark plug is dirty or cracked, change it. If it’s oily, leave it out, hold a rag over the plug hole and pull the recoil cord several times to blow out any oil in the cylinder, then wipe off the plug and reinsert it.
What to do when the engine lacks power or is not running smoothly?
- Check that the Throttle Lever is in the “Run” position.
- Is the air filter clean? If it’s dirty, change it following the procedure in the engine manufacturer’s owner’s manual.
- Is the spark plug clean? If it’s fouled or cracked, change it. If it’s oily, leave it out, hold a rag over the plug hole and pull your recoil cord several times to blow out any oil in the cylinder, then wipe off the plug and reinsert it.
- Are you using fresh and clean unleaded gas? If it’s old, change it. Use a fuel stabilizer if you keep gas longer than 30 days.
- Does your engine have the right amount of clean oil? If it’s dirty, change it following the procedure in the engine manufacturer’s owner’s manual.
- Check the oil level and adjust as needed.
Why does the wood chipper not seem to have full chipping power?
The belts may be too loose and slipping. Please adjust or replace the belts.