Trituradora de madera a gasolina con arranque eléctrico de 6" 15 HP 420cc
Trituradora de madera a gasolina con arranque eléctrico de 6" 15 HP 420cc
Agotado
No se pudo cargar la disponibilidad de retiro
¿Preguntas antes de comprar?
-
Llámanos al 888-589-8148
Lun - Vie 8AM - 5PM EST -
Service@cheryindustrial.com
Correo electrónico de contacto de Servicio al Cliente

Trituradora de madera a gasolina con arranque eléctrico de 6" 15 HP 420cc
Descripción
La astilladora de madera a gasolina de 6", 15 HP y 420 cc con arranque eléctrico está diseñada para el procesamiento de madera de uso intensivo en granjas, silvicultura y grandes proyectos de paisajismo. Impulsada por un confiable motor RATO R420D de 15 HP OHV, ofrece un rendimiento sólido y consistente con la comodidad del arranque eléctrico. El sistema de corte de tambor astilla eficientemente ramas de hasta 6 pulgadas de diámetro, convirtiendo grandes volúmenes de residuos de madera en astillas uniformes y manejables. Con su diseño remolcable y construcción robusta, esta astilladora de madera está construida para la productividad, la movilidad y la durabilidad a largo plazo en entornos exteriores exigentes.
Potente motor de 15 HP
Motor RATO 420cc OHV con arranque eléctrico para una fácil operación.
Capacidad de astillado de 6"
El sistema de corte de tambor maneja ramas grandes de manera eficiente.
Aplicación de trabajo pesado
Ideal para granjas, silvicultura y grandes proyectos de paisajismo.
Diseño remolcable
Fácil de transportar y posicionar en diferentes lugares de trabajo.
Características
-
RATO R420D Engine
This towable wood chipper is equipped with a 420cc 15HP RATO R420D e-start engine, which meets EPA certification standards.
-
Chipping Diameter and Cutting Method
Feed Chute W x L: 21" x 22". Feed chute opening method: hinges. The core cutting component employs a roller drum cutting method. It delivers maximum cutting force to easily handle wood or branches up to 6 inches in diameter.
-
Adjustable Deflector
Adjustable deflector design. 360 degree rotating discharge chute design.
-
Both Emergency Stop Bar Design
Set very close to the operator. In case of emergencies or equipment malfunctions, rapid shutdown can be activated to ensure safety.
-
Jocky Wheel
Provides additional support points when equipment is in operation or parked, preventing tipping or shaking caused by uneven weight distribution, imbalanced loads, or unstable ground.
-
Hinge Opening Design
The feed chute and discharge chute are all designed with hinges, allowing for quick and convenient side opening to clean residual wood chipsor replace blades.
-
16x8-7 Tubeless Tire
This towable wood chipper is equipped with two tubeless rubber tires, sized 16x8-7, which allow you to easily move it. Provides enhanced stability during towing.
-
Tow Bar with 2 in Coupler
Compliant with American standards, equipped with a safety lock buckle.
Especificaciones
Envío
Envío desde almacén de EE. UU., tiempo de cumplimiento: 6-10 días hábiles
• Largo x Ancho x Alto (pulgadas): 39x30x45
• Peso (lb): 467
• Se requiere un montacargas o equipo equivalente para la descarga.
Para obtener información de envío adicional, visite nuestra Política de envío.
Montaje
Preguntas frecuentes
Why won't the engine start?
The engine could not start because of these problems, please check them and fix your issue accordingly.
- Is the ignition switch in the “ON” position?
- Is the fuel shut-off valve on?
- Are you using fresh and clean gas? If the gas is old, change it. Use a fuel stabilizer if you keep gas longer than 30 days.
- Is the spark plug clean? If the spark plug is dirty or cracked, change it. If it’s oily, leave it out, hold a rag over the plug hole and pull the recoil cord several times to blow out any oil in the cylinder, then wipe off the plug and reinsert it.
What to do when the engine lacks power or is not running smoothly?
- Check that the Throttle Lever is in the “Run” position.
- Is the air filter clean? If it’s dirty, change it following the procedure in the engine manufacturer’s owner’s manual.
- Is the spark plug clean? If it’s fouled or cracked, change it. If it’s oily, leave it out, hold a rag over the plug hole and pull your recoil cord several times to blow out any oil in the cylinder, then wipe off the plug and reinsert it.
- Are you using fresh and clean unleaded gas? If it’s old, change it. Use a fuel stabilizer if you keep gas longer than 30 days.
- Does your engine have the right amount of clean oil? If it’s dirty, change it following the procedure in the engine manufacturer’s owner’s manual.
- Check the oil level and adjust as needed.
Why does the wood chipper not seem to have full chipping power?
The belts may be too loose and slipping. Please adjust or replace the belts.