Trituradora de madera a gasolina de 6", 15 HP y 420 cc
Trituradora de madera a gasolina de 6", 15 HP y 420 cc
Pre-venta
Trituradora de madera a gasolina de 6", 15 HP y 420 cc
-
TX
Retiro disponible, normalmente está listo en 24 horas
3452 South Burleson Boulevard
Alvarado TX 76009
Estados Unidos+16823509488
-
MD
Retiro disponible, normalmente está listo en 24 horas
413 West Pulaski Highway
Elkton MD 21921
Estados Unidos -
CA
Retiro disponible, normalmente está listo en 24 horas
6911 32nd St
North Highlands CA 95660
Estados Unidos
No se pudo cargar la disponibilidad de retiro
¿Preguntas antes de comprar?
-
Llámanos al 888-589-8148
Lun - Vie 8AM - 5PM EST -
Service@cheryindustrial.com
Correo electrónico de contacto de Servicio al Cliente

Trituradora de madera a gasolina de 6", 15 HP y 420 cc
Descripción
La trituradora de madera de 6" con motor de gasolina RATO de 15 HP está diseñada para cortar árboles y ramas sin esfuerzo. Su cuchilla reversible de doble filo prolonga la durabilidad, mientras que la rampa de descarga giratoria de 360° añade flexibilidad. La rampa de alimentación de apertura rápida simplifica el mantenimiento y la barra de remolque tipo bola de 2" mejora la movilidad. Ideal para profesionales y empresas de alquiler, procesa eficientemente los residuos del jardín en mantillo o fertilizante.
Potente motor de gasolina RATO de 15 hp y 420 cc con arranque por retroceso.
Diámetro máximo de trituración de 6": El rodillo tiene un diámetro de 14", generando una fuerte inercia para cortar madera de hasta 6" de diámetro.
Rampa de alimentación de apertura lateral: Retire 2 tornillos para abrir la tolva para facilitar la limpieza y el cambio de cuchillas.
Altura de la rampa de expulsión: Rampa de altura de caja de camión de 61" con capó de hierro fundido giratorio ajustable.
Rotación de 360° de la rampa de descarga: Funciona con equipos de carga para descargar los desechos con precisión y aumentar la eficiencia.
Barra de seguridad de parada: Empuje la barra de seguridad para detener la máquina instantáneamente en caso de emergencia.
Barra de remolque extraíble (bola de 2"): Con un enganche de remolque extraíble como característica de seguridad para un trabajo conveniente al aire libre.
Neumáticos 16x8.0-7 con clasificación DOT: La distancia entre ejes alcanza 40.6", proporcionando estabilidad al remolcar.
Ruedas delanteras elevables: Eleve los neumáticos delanteros para remolcar; bájelos para apoyar cuando la trituradora esté en uso.
Características
-
6" Max Chipping Dia
The roller has a diameter of 14", generating strong inertia to cut wood up to 6" dia.
-
Discharge Chute 360° Rotation
Works with loading equipment to discharge debris accurately and boost efficiency.
-
Side-opening Feed Chute
Remove 2 bolts to open the hopper for easy cleaning and blade changes.
Vídeo
Especificaciones
Envío
Envío desde almacén de EE. UU., tiempo de cumplimiento: 6-10 días hábiles
• Largo x Ancho x Alto (pulgadas): 45.3x30.7x48.4
• Peso (lb): 617.3
• Se requiere una carretilla elevadora o equivalente para la descarga.
Para obtener información adicional sobre el envío, visite nuestra Política de envío.
Montaje
Manual-R420 Motor de Gasolina Rato
No requiere montaje complejo, simplemente instale la tolva de alimentación y estará listo para usar.
Piezas
-
Cinturones (Paquete de 2)
4.0 / 5.0
(1) 1 reseñas totales
Precio habitual $85.00Precio de oferta $85.00Precio unitario / porEn existencias -
Cuchillas Reversibles de 12" (Paquete de 2)
/
(0) 0 reseñas totales
Precio habitual $150.00Precio de oferta $150.00Precio unitario / porEn existencias -
Lista de piezas - Trituradora de madera
/
(0) 0 reseñas totales
Precio habitual $51.00Precio de oferta $51.00Precio unitario / porEn existencias -
VER TODO
Preguntas frecuentes
Why won't the engine start?
The engine could not start because of these problems, please check them and fix your issue accordingly.
- Is the ignition switch in the “ON” position?
- Is the fuel shut-off valve on?
- Are you using fresh and clean gas? If the gas is old, change it. Use a fuel stabilizer if you keep gas longer than 30 days.
- Is the spark plug clean? If the spark plug is dirty or cracked, change it. If it’s oily, leave it out, hold a rag over the plug hole and pull the recoil cord several times to blow out any oil in the cylinder, then wipe off the plug and reinsert it.
What to do when the engine lacks power or is not running smoothly?
- Check that the Throttle Lever is in the “Run” position.
- Is the air filter clean? If it’s dirty, change it following the procedure in the engine manufacturer’s owner’s manual.
- Is the spark plug clean? If it’s fouled or cracked, change it. If it’s oily, leave it out, hold a rag over the plug hole and pull your recoil cord several times to blow out any oil in the cylinder, then wipe off the plug and reinsert it.
- Are you using fresh and clean unleaded gas? If it’s old, change it. Use a fuel stabilizer if you keep gas longer than 30 days.
- Does your engine have the right amount of clean oil? If it’s dirty, change it following the procedure in the engine manufacturer’s owner’s manual.
- Check the oil level and adjust as needed.
How to fix it when the engine smokes?
- Check the oil level and adjust as needed.
- Check the air filter and clean or replace if needed.
- You may be using the wrong oil—too light for the temperature. Refer to your Engine Owner’s Manual for detailed information.
- Clean the cooling fins if they’re dirty.
Why does the wood chipper not seem to have full chipping power?
The belts may be too loose and slipping. Please adjust or replace the belts.
If you need a powerful machine to manage yard debris, trees, or land cleanup on a few acres, this is a high-value option.
6" 15 HP 420cc Gas Powered Wood Chipper
Purchased the Chery Industrial 6-inch chipper being I have about 10 acres of wooded property that I wanted to thin out for preparation of building a new home. Upon receipt which delivered a few days earlier than expected, I went through the process of completing the assembly and prep the machine for operation. The unit fired up as expected with no issues. Make sure you check all the bolts before starting. The chipper met or exceeded all my expectations. I'm very pleased with this purchased. I've already completed the 5-hour oil change service. I did purchase an hour meter from amazon for 10 bucks so i can track usage. Currently I have 21 hours of use and still going strong. I did sharpen the blades once. During this time, I only had one jam which was my fault but easy to clean. Note I've ran all kinds of hardwoods that includes Locust with no issues. Would recommend this chipper
Assembly is simple and straightforward. Chop quickly and smoothly with high yield. Eats small trees easily.
Transport and storage: heavy, but relatively easy to move; yellow feed spout is removable for storage.
The delivery was a pretty much what I expected and the chipper was well packed.
Customer service is exceptional and the product itself it is a showcase of quality. After a couple of hours assembling and gauging the oil and gas I was able to start it up right away!